1
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 23, 2016, 06:48:35 PM »
Done!
Thank you Tigzy.
Lyn
Thank you Tigzy.
Lyn
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 22, 2016, 11:41:32 PM »
Thank you, BOTH of you. I am a little frightened. But I trust and know that I'm in good hands.
Bless you both for all your work in protecting all of us, out here.
Lyn
Bless you both for all your work in protecting all of us, out here.
Lyn
3
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 21, 2016, 10:31:20 PM »
Yes,
I'm open to that. Thx, Lyn
P.S. Computer has been defragged.
I'm open to that. Thx, Lyn
P.S. Computer has been defragged.
4
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 21, 2016, 06:05:58 PM »
Thanks for your kind words, Curson.
I had uninstalled RK about 2 weeks ago. Since then, every download of RK will not install, so there''s nothing for me to uninstall at this point.
The same thing goes for the "Installable Version". It downloaded, but would not install. However, this version did not freeze up my computer.
Could there be a leftover file from RK that could be causing this? In other words, should I try defragging? I checked the Program Files folder, and don't see anything.
Best,
Lyn
I had uninstalled RK about 2 weeks ago. Since then, every download of RK will not install, so there''s nothing for me to uninstall at this point.
The same thing goes for the "Installable Version". It downloaded, but would not install. However, this version did not freeze up my computer.
Could there be a leftover file from RK that could be causing this? In other words, should I try defragging? I checked the Program Files folder, and don't see anything.
Best,
Lyn
5
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 19, 2016, 02:53:06 AM »
Ran the command successfully. But there is no RogueKiller.exe_<datetime>.dmp file on my desktop. here is the result of the scan:
RogueKiller V12.0.2.0 [Mar 14 2016] (Premium) by Adlice Software
mail : http://www.adlice.com/contact/
Feedback : http://forum.adlice.com
Website : http://www.adlice.com/software/roguekiller/
Blog : http://www.adlice.com
Operating System : Windows XP (5.1.2600 Service Pack 3) 32 bits version
Started in : Normal mode
User : Lynda [Administrator]
Started from : C:\Documents and Settings\Lynda\Desktop\RogueKiller.exe
Mode : Scan -- Date : 03/18/2016 19:07:46
¤¤¤ Processes : 0 ¤¤¤
¤¤¤ Registry : 0 ¤¤¤
¤¤¤ Tasks : 0 ¤¤¤
¤¤¤ Files : 0 ¤¤¤
¤¤¤ Hosts File : 0 ¤¤¤
¤¤¤ Antirootkit : 0 (Driver: Loaded) ¤¤¤
¤¤¤ Web browsers : 0 ¤¤¤
¤¤¤ MBR Check : ¤¤¤
+++++ PhysicalDrive0: ST500LM012 HN-M500MBB +++++
--- User ---
[MBR] 9da7ff183e7432dccc73f5e1ae2b2bac
[BSP] ae203e84dcb456630d870d8f3155a2b5 : Windows XP MBR Code
Partition table:
0 - [XXXXXX] DELL-UTIL (0xde) [VISIBLE] Offset (sectors): 63 | Size: 78 MB
1 - [ACTIVE] NTFS (0x7) [VISIBLE] Offset (sectors): 160650 | Size: 111835 MB [Windows XP Bootstrap | Windows XP Bootloader]
2 - [XXXXXX] EXTEN-LBA (0xf) [VISIBLE] Offset (sectors): 229199355 | Size: 2557 MB
User = LL1 ... OK
User = LL2 ... OK
Wish I was more computer savvy, Lyn
RogueKiller V12.0.2.0 [Mar 14 2016] (Premium) by Adlice Software
mail : http://www.adlice.com/contact/
Feedback : http://forum.adlice.com
Website : http://www.adlice.com/software/roguekiller/
Blog : http://www.adlice.com
Operating System : Windows XP (5.1.2600 Service Pack 3) 32 bits version
Started in : Normal mode
User : Lynda [Administrator]
Started from : C:\Documents and Settings\Lynda\Desktop\RogueKiller.exe
Mode : Scan -- Date : 03/18/2016 19:07:46
¤¤¤ Processes : 0 ¤¤¤
¤¤¤ Registry : 0 ¤¤¤
¤¤¤ Tasks : 0 ¤¤¤
¤¤¤ Files : 0 ¤¤¤
¤¤¤ Hosts File : 0 ¤¤¤
¤¤¤ Antirootkit : 0 (Driver: Loaded) ¤¤¤
¤¤¤ Web browsers : 0 ¤¤¤
¤¤¤ MBR Check : ¤¤¤
+++++ PhysicalDrive0: ST500LM012 HN-M500MBB +++++
--- User ---
[MBR] 9da7ff183e7432dccc73f5e1ae2b2bac
[BSP] ae203e84dcb456630d870d8f3155a2b5 : Windows XP MBR Code
Partition table:
0 - [XXXXXX] DELL-UTIL (0xde) [VISIBLE] Offset (sectors): 63 | Size: 78 MB
1 - [ACTIVE] NTFS (0x7) [VISIBLE] Offset (sectors): 160650 | Size: 111835 MB [Windows XP Bootstrap | Windows XP Bootloader]
2 - [XXXXXX] EXTEN-LBA (0xf) [VISIBLE] Offset (sectors): 229199355 | Size: 2557 MB
User = LL1 ... OK
User = LL2 ... OK
Wish I was more computer savvy, Lyn
6
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 18, 2016, 02:11:42 AM »
Curson,
The command didn't work. I tried it with the quotes and without the quotes. It does not allow me to copy & paste, see attached.
Lyn
The command didn't work. I tried it with the quotes and without the quotes. It does not allow me to copy & paste, see attached.
Lyn
7
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 18, 2016, 12:29:00 AM »
OMG, Curson, I'm not sure I have enough knowledge to pull this off, but I will certainly try!
I'll get back to you.
Thanks,
Lyn
I'll get back to you.
Thanks,
Lyn
8
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 17, 2016, 04:09:41 AM »
Sigh. 
But thanks again for trying!
Lyn
But thanks again for trying!
Lyn
9
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 16, 2016, 08:47:40 PM »
Nope, RK will still not Run.
Don't know if this info will be helpful, but after I click on RUN, a tab opens on my lower tool bar that reads, "Set-Up". If I click on that tab, nothing happens, yet unless I right click on it and select "Close tab" or "exit", my computer freezes (except the cursor); nothing else will function properly until that tab is closed - or the RK function is stopped.
I don't know what it's doing, but RK is doing something, as it renders the rest of my computer dead.
Best,
Lyn
Don't know if this info will be helpful, but after I click on RUN, a tab opens on my lower tool bar that reads, "Set-Up". If I click on that tab, nothing happens, yet unless I right click on it and select "Close tab" or "exit", my computer freezes (except the cursor); nothing else will function properly until that tab is closed - or the RK function is stopped.
I don't know what it's doing, but RK is doing something, as it renders the rest of my computer dead.
Best,
Lyn
10
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 16, 2016, 08:32:22 PM »
Okay, first, here is the fixlog.
Now I'll try downloading & running RK, and see if it works. Be back soon. Thanks SOOOO much,
Lyn
Now I'll try downloading & running RK, and see if it works. Be back soon. Thanks SOOOO much,
Lyn
11
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 16, 2016, 02:37:50 AM »
ooops, don't think the other one attached - trying again...
12
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 16, 2016, 02:35:02 AM »
OK, here ya go, they're attached....
and thanks again for all your help!!
Lyn
and thanks again for all your help!!
Lyn
13
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 15, 2016, 08:25:12 PM »
Thank you! Here is the log file.
Best,
Lyn
Best,
Lyn
14
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 11, 2016, 02:10:23 AM »
Hi Curson,
No such things happened:
"A black screen will appear and then disappear. This means that the tool has been successfully executed.
An Rkill.log will appear. Please attach it with your reply (file also located at C:\rkill.log)".
Again, the download appears to be successful, but the program will not load. Re-booted in Safe Mode, signed as Admin, program would not install. I even changed my admin password (from the "run" command), re-booted, and tried again. No success.
The only thing I have is MS Malicious Malware Removal Tool, Windows Firewall and MalwareBytes AntiMalware (which I again disabled today, to run these functions). I'm running Firefox 43.0.1 on windows XP, SP 3. Clean machine here.
I am stumped (which, admittedly, is easy to do!).
Best,
Lyn
No such things happened:
"A black screen will appear and then disappear. This means that the tool has been successfully executed.
An Rkill.log will appear. Please attach it with your reply (file also located at C:\rkill.log)".
Again, the download appears to be successful, but the program will not load. Re-booted in Safe Mode, signed as Admin, program would not install. I even changed my admin password (from the "run" command), re-booted, and tried again. No success.
The only thing I have is MS Malicious Malware Removal Tool, Windows Firewall and MalwareBytes AntiMalware (which I again disabled today, to run these functions). I'm running Firefox 43.0.1 on windows XP, SP 3. Clean machine here.
I am stumped (which, admittedly, is easy to do!).
Best,
Lyn
15
RogueKiller PREMIUM / Re: RK Crashing & Will Not Update
« on: March 10, 2016, 05:03:54 PM »
Hi Curson,
I have safe-uninstalled SuperAnti-Spyware and turned off Malwarebytes Anti-Malware. Then I re-booted. Then, just to be certain I was running a clean computer, I ran the MS Virus Repair Tool, doing a deep scan which took almost 6 hours. No infections. I then uninstalled RK version 10 and re-booted.
After all that, I tried installing the current FREE version, just to see if it would work like the other free ones always used to. It downloaded, but would not install. Same thing with my paid subscription version, which I tried to download next. It would not install.
I have no clue why this is happening.
Will this be fixed in Version 12, and isn't that supposed to come out this week (not the beta)?
Thanks, Lyn
I have safe-uninstalled SuperAnti-Spyware and turned off Malwarebytes Anti-Malware. Then I re-booted. Then, just to be certain I was running a clean computer, I ran the MS Virus Repair Tool, doing a deep scan which took almost 6 hours. No infections. I then uninstalled RK version 10 and re-booted.
After all that, I tried installing the current FREE version, just to see if it would work like the other free ones always used to. It downloaded, but would not install. Same thing with my paid subscription version, which I tried to download next. It would not install.
I have no clue why this is happening.
Will this be fixed in Version 12, and isn't that supposed to come out this week (not the beta)?
Thanks, Lyn
Pages: [1] 2
